Valtra T Series - User Profile Management

PROFILE
All settings of the SmartTouch display are stored in
proles. Every setting you change (except terminal settings)
is automatically saved to the active prole.
You can create different proles according to:
- User
- Specic work
- Implement
- User + implement combinations
(when multiple operators per tractor)
CREATE A PROFILE
1.
You can enter the prole settings from every
terminal menu by tapping on the top bar.
2.
VALTRA is your default prole you cannot
delete or change. Copy the default prole.
3.
Rename the new prole and modify the settings.
4.
Tick the box in front of the new prole´s
name and activate the prole.
5.
Modify the settings, which are
saved to the prole in use.
TIP: There is no limit of proles you can create.
1
2
3
4
4
T/N Series Quick Guide / Direct
30