Speed cruise control is controlled by the drive lever.
It offers the possibility to maintain a steady speed.
1.
Push the drive lever to the right to engage cruise, hold for 2 seconds to store
new speed.
2.
When cruise control is active you can easily adjust your cruise speed with
the thumb wheel located on the drive lever.
3.
Reactive cruise speed by quickly pushing the drive lever to the right.
4.
Cruise deactivates by pressing brake pedals or push the drive lever left.
After deactivating you control the speed by speed pedal (or lever).
5.
Together with the memory buttons M1, M2 and M3 you have the possibility
to save in total four different speed cruise speeds to be used at the same
time.
NOTE: When driving in Manual mode, there works, instead
of speed cruise, a Transmission Ratio memory.
CRUISE
CONTROL
1
4
2
3
5
17
T/N Series Quick Guide / Direct
To Next Page
Loading...
Need help?
General
