Valtra T Series - A-B-C-D = Four Work Areas; How to Change Speed Range

40
km/h
Sweet
spots
50
km/h
Sweet
spots
A
0-6.5
km/h
1,6 km/h
4,9 km/h
0-8
km/h
2 km/h
6 km/h
High power & torque requirement, low speed.
E.g. subsoiling and de-stoning.
B
0-13.5
km/h
3,4 km/h
10,1 km/h
0-17
km/h
4,3 km/h
12,8 km/h
Medium/high torque requirement,
medium speed. E.g. ploughing, bed
forming, power-harrowing, drilling,
hedge cutting.
C
0-21
km/h
5,3 km/h
15,8 km/h
0-26
km/h
6,5 km/h
19,5 km/h
Medium torque, variable forward speed.
E.g. Field transport, light ploughing,
mowing, hedge-cutting, drilling, starting with
heavy loads.
D
0-40
km/h
10 km/h
30 km/h
0-50
km/h
(57 km/h)
12,5 km/h
37,5 km/h
Low torque, high forward speed, not PTO.
Road transport range.
Valtra continuously variable transmission (CVT) is truly a working machine.
There are 4 working areas with 2 sweet spots per area, where transmission
efciency is over 90%. A total of 8 sweet spots is the highest amount in any
CVT tractor in this segment!
+ Best efficiency for all tasks (save fuel and transmission)
+ Optimal transmission efficiency for every task and every driving speed
+ Best pulling ability
+ 92% of speeds with excellent transmission efficiency
It is easy to nd the
sweet spot of each
range by calculating
25 % and 75 % of
the area’s top speed.
A-B-C-D =
FOUR WORK AREAS
T/N Series Quick Guide / Direct
14