1
2
EcoPower is a Valtra innovation for more than 15 years.
EcoPower-mode is designed especially for work that requires
high torque, but not constant engine revs e.g. pulling work on
the eld. With EcoPower you get the maximum power and torque
at approximately 200 RPM lower than in the normal mode.
This allows lower noise levels and lower fuel consumption.
ENGAGE THE ECOPOWER-MODE THROUGH THE SMARTTOUCH DISPLAY
1.
Go to the engine screen with the engine button
2.
Select the EcoPower-mode to engage the EcoPower mode
When using Eco-mode, the engine revs will not exceed 1900 r/min.
Both the highest power and the highest torque will be reached by much
lower engine speed.
TIP: Pulling work: The low revs can be best tested in heavy pulling work.
Most of the competitors´ tractors cannot pull effectively with such low
engine revs like 1000 rpm.
Transport (uphill): With Eco-mode, the tractor can be driven with
higher powershift ”gear”-lower revs
PTO work: With 540E & 1000E PTO’s also PTO work is an easier task
ECOPOWER-MODE
(ONLY ON MODELS N155ECO AND T175ECO)
T/N Series Quick Guide / Direct
16
To Next Page
Loading...
Need help?
General
