Procedure
1. Chock the front axle beam with wooden
shims (1) on both sides, to ensure the lateral
balance of the front assembly to be moved.
GUID-99393715-2C74-4BE7-86C5-F90BA1AEA02B-high.jpg [High]
Fig. 12
2. Engage the park brake and chock the rear
wheels with wooden wedges.
GUID-153C6BC0-84BC-4F53-8D86-0E857150F093-high.jpg [High]
Fig. 13
3. Unlock and lift the engine cover at the front
of the tractor.
4. Loosen and disconnect the negative battery
cable (arrow).
GUID-476B01A7-4CFC-4B9A-8968-1CA768C52BC7-high.jpg [High]
Fig. 14
1. Introduction
1-32
ACX2831410
To Next Page
Loading...
