http://www.valuehobby.com/
27
Section 9 – Electric Motor and ESC Installation
Step 1. We recommend Gforce G15 (2820) motor for this airplane (not included).
Step 2. Install your brushless motor onto the firewall using the 4 black 3mm allen-head screws
included in your kit. Make sure the motor spins freely. Depending on the size of the shaft collar
on your motor, you may need to remove a small amount of wood from the firewall for free
rotation.
Step 3. Install the ESC inside the motor box or inside the fuselage, depending on the
requirement of balancing the CG.
To Next Page
Loading...
Need help?
General
