VHD-V600(S) Video Conference Camera User Manual
11
Method 2: Open “upgrade_En.exe”, change IP
and click “Set”. After modified, IP Camera will
be restart.
IP camera default IP address “192.168.100.88”,
the username is “admin”, password is “admin”.
6.4.2 Visit/Access IP Camera
Input http://192.168.100.88 to IE (better with IE
web browser, others will cause little latency), a
login window pop up, input login name: admin,
password: admin, shown as below:
After login, shown as below:
If user first time use this camera by internet
(only for new user), must install a player
software (VLC). Please go to VLC website
http://www.videolan.org/vlc/#download and
Install VLC (player software).After installation,
login again, will show as above:
6.5 IP Camera controlled by WAN
6.5.1 Setup IPC controlled by dynamic DNS
Two dynamic DNS: Dyndns.org, 3322.org.
Router Port Mapping:
Take Tenda router for example, enter the
Router Home Page (interface page), select
“Advanced”- “Virtual Server”, add a new port
number in “Ext Port”, add a new port number in
“Int port”, put camera IP address to “Internal
IP”, then select “Save”, shown as below:
To Next Page
Loading...
