ValueHD VHD-V61 - IR Remote: Focus, Zoom, and Addressing; Focus and Zoom Controls; Camera Select & IR Addressing; Pan;Tilt and Menu Navigation

To Next Page

To Previous Page

ValueHD Corporation

become dark. In this case, press the backlight ON / OFF button. To cancel this function, press the backlight ON /

OFF button.

5. Focus Buttons

Used for focus adjustment.

Press [AUTO] adjust the focuses on the center of the object automatically. To adjust the focus manually, press the

[MANUAL] button, and adjust it with [Focus＋] (Focus on far object) and [Focus－] (Focus on near object)

6. Camera Select Buttons

Press the button corresponding to the camera you want to operate with the remote controller.

7. # Button

8. Pan/Tilt Control Buttons

Press arrow buttons to perform panning and tilting. Press [HOME] button to face the camera back to front

9. Menu Setting

Menu button: Press this button to enter or exit the OSD menu

10. Zoom Buttons

Zoom : Zoom In

Zoom : Zoom Out

11. Set Camera IR Address Buttons

[*]+[＃]+[F1]: Address1

[*]+[＃]+[F2]: Address2

[*]+[＃]+[F3]: Address3

[*]+[＃]+[F4]: Address4