Assistance settings
The pedal assistance level can be set using assistance settings 1, 2 and 3. The
assistance settings can be changed while cycling.
1. Low level of assistance, maximum range.
2. Average support, average range.
3. Maximum support, low range.
Reverse pedalling
The reverse function is activated by pedalling backwards from a stationary position. After
a few turns of the wheel, the motor is activated and the bicycle will reverse at the speed
of 3 km/h for as long as it is pedalled backwards.
Do not let the electric motor's sudden behaviour take you by surprise. For
example, if you wait at the traffic lights and pedal backwards just for fun, the
reverse function will be activated and the bike will start riding backwards!
Presets
A preset is a set of settings which sets the level of assistance. By loading a different
preset, the level of assistance for all assistance settings can be adjusted. Presets can be
changed by the dealer or through the Van Raam app.
Van Raam E-Bike app
With the app, you can track various information and configure the assistance modes.
(More information on this can be found in the chapter on the Van Raam E-Bike app)
To Next Page
Loading...