Van Raam Fun2Go 2 - Maintenance Schedule; Maintenance Overview Table; Monthly Inspection Tasks; Annual Inspection Tasks

52/59
Version 23.05
Maintenance recommendation
A Van Raam bike often is subject to extensive use and must perform in all weather
conditions. By correctly maintaining the bike, the lifecycle can be extended greatly. This
maintenance can be done by a Van Raam dealer. In most cases, you can do the monthly
and annual inspection yourself.
Maintenance Overview:
What
One-person bike
Multi-person
bike
Duration
By whom?
1
st
service moment
3 months/300 km
3 months/200 km
15 min
Dealer
2
nd
Service moment
6 months/1.000 km
6 months/500 km
15-30 min
Dealer
3
rd
Service moment
12 months/2.000
km
12 months/1.000
km
30-90 min
Dealer
Monthly inspection*
Every month
Every month
15 min
User
Annual inspection*
Every 12 months
Every 12 months
60 min
User
* This is advised to extend your bike’s lifecycle. You can also have this done by your dealer.
Monthly inspection
15 minutes
Among them:
• Check and inflate the tyres
• Check the chain tension and
grease if needed
• Tighten bolts/nuts where
needed
• Check all lights
• Check the brakes
• Check all rotating parts and
grease if needed
• Clean the bike
Annual inspection
60 minutes
Among them:
• Check and touch up the
paintwork
• Check the wheels for any
buckling
• Check the spoke tension
• Check the steering ball joints
• Check all lights
• Check the saddle clamp
• Check the placement of all
electric components (E-Bikes
only)