Vanderbilt SPCE652.100 - Page 30

3.7.2 Compliance with NF and A2P approvals including CYBER requirements - SPC
Products
SPC products listed have been tested according to NF324 - H58, with reference to RTC50131-6 and
RTC50131-3 and current EN certifications. See Compliance with EN50131 Approvals on page20.
Product Type Configuration Standard Logo
SPC6350.320 + SPCP355.300
(Cert. 1233700001 + Cert.8033700002)
60h, unmonitored NF Grade 3,
Class 1
SPC5350.320 + SPCP355.300
(Cert. 1233700001 + Cert.8033700002)
60h, unmonitored
SPC6350.320
(Cert. 1233700001)
60h, unmonitored
SPC5350.320
(Cert. 1233700001)
60h, unmonitored
SPC6330.320 + SPCP333.300
(Cert. 1233700001)
60h, unmonitored NF Grade 3,
Class 1
SPC5330.320 + SPCP333.300
(Cert. 1232200003)
60h, unmonitored
SPC6330.320
(Cert. 1233700001)
30h, monitored
SPC5330.320
(Cert. 1232200003)
30h, monitored
SPC5320.320
(Cert. 1232200003)
36h, unmonitored NF Grade 2,
Class 1
SPC4320.320
(Cert. 1232200003)
36h, unmonitored
SPCN110.000
SPCN320.000
SPCK420.100
SPCK620.100
SPCK623.100
SPCE652.100
SPCE452.100
SPCE110.100
SPCE120.100
NF Grade 2
and 3,
Class 1
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Directives and standards
© Vanderbilt 2018 30 A6V10276959-d
11.2018