Vanderbilt SPCE652.100 User Manual

23.8 CID Codes 373
23.9 Overview of keypad types 375
23.10 User PIN combinations 376
23.11 Duress PINs 376
23.12 Automatic inhibits 376
23.12.1 Zones 376
23.12.2 Access PINs 377
23.12.3 Engineer Access 377
23.12.4 Keypad User Logoff 377
23.13 Wiring of mains cable to the controller 377
23.14 Maintenance controller 377
23.15 Maintenance Smart PSU 378
23.16 Zone types 379
23.17 Zone attributes 384
23.18 Applicable attributes to zone types 387
23.19 ATS levels and attenuation specifications 388
23.20 Supported card readers and card formats 388
23.21 SPC Support for E-Bus Devices 390
23.21.1 Configuring and Addressing E-Bus Devices 391
23.22 FlexC Glossary 393
23.23 FlexC Commands 394
23.24 ATS Category Timings 397
23.25 ATP Category Timings 398
24 Notes 400
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Table of Contents
© Vanderbilt 2018 9 A6V10276959-d
11.2018

Vanderbilt SPCE652.100 Specifications

General

Brand	Vanderbilt
Model	SPCE652.100
Category	Power Supply
Language	English