5
2. TECHNICAL DATA (CONT’D)
2.5 SPECIFICATIONS
MODEL NOVO+ 100H NOVO+ 200H
W
EIGHT 65 LB. (29.5 kg) 65 LB. (29.5 kg)
PORT DIAMETER 6˝ (152 MM) 6˝ (152 MM)
D
RAIN DIAMETER 1/2˝ (12 MM) 1/2˝ (12 MM)
I
NSTALLATION CHAINS AND SPRINGS (PROVIDED WITH THE UNIT)
M
OTOR SPEED HIGH AND LOW SPEED FACTORY SET (OPTIONAL INCREASED LOW SPEED)
E
LECTRICAL SUPPLY 120 V, 60 HZ 120 V, 60 HZ
POWER CONSUMPTION 160 WATTS 195 WATTS
(Primarily for homes with radiant hot water or electric baseboard heating.
See illustration at right.)
Moist, stale air is exhausted from the high humidity areas in the home, such as
bathrooms, kitchen and laundry room.
Fresh air is supplied to bedrooms and principal living areas.
3. TYPICAL INSTALLATIONS
3.1 FULLY DUCTED SYSTEM
There are two common installation methods.
VH0077
See 4.5.1 for details
(For homes with forced air heating. See illustration at right.)
Moist, stale air is exhausted from the high humidity areas in the home, such as
bathrooms, kitchen and laundry room. Fresh air is supplied to the cold air return
or the supply duct of the furnace.
NOTE: For this type of installation, it is essential that the furnace blower runs
when the unit is in operation.
3.2 SYSTEM COMBINED WITH A FURNACE
VH0087
See 4.5.2 for details
To Next Page
