8
Installation
4. Installation :
4.2. Driver Installation :
Windows 2000/XP/Vista :
An automated driver installation process will
begin upon the detection of the new PCI card
and an embedded driver will be loaded. You
may be prompted to restart your computer.
Windows 98 :
(1) After the installation of PCI Card. Enter
Windows 98 and an “Add New Hardware
Wizard” dialog will appear. Click “NEXT”.
( Figure 4.2-A )
(2) Select "Search for the best driver for your
device." ( Figure 4.2-B )
(3) Check the box under the search. Press browse,
select the X:\UGT-FW100/Driver/win 98
of the CD-ROM and press “NEXT”. X is the
path for your CD-ROM drive. Please make
sure that your path is set correctly.
( Figure 4.2-C )
PC Users
( Figure 4.2-A )
( Figure 4.2-B )
( Figure 4.2-C )
X:\UGT-FW100/Driver/win 98
To Next Page
Loading...
