Vantrue E1 Lite User Manual

6
7. The SD Card Slot accepts Micro SD cards up to 512GB in FAT32 format, class 10.
8. The Power ( ) Button powers the dash cam on or off with a long press. During
recording, a short press enters event recording mode, and pictures can be taken
with a short press.
9. The Mount Port connects to a Type C cable or car charger for power supply.
10. The Front Camera is used for recording the road ahead.
11. The Mount Interface is where you connect the device to its mount.
12. The Power Port allows connection to a Type C cable or car charger for power, as well
as data transfer when connected to a data cable.
13. The Reset Button is used to force a reset of the device if necessary.
14. The Screen is a 1.54" LCD display that provides visual feedback and interaction.
15. The LED indicator shows a steady green light when the device is in standby mode,
and it blinks green when the camera is recording.
Screen Overview
Video Resolution
Connecting to GPS
Connected
Voice Assistant
Time lapse is ON
Collision detection is ON
Motion detection is ON
1080P / 15 FPS Low bitrates recording is ON
720P / 15 FPS Low bitrates recording is ON
Low framerate parking mode is ON
G-Sensor OFF
G-Sensor ON
Current speed (Either in
KMH or MPH
No memory card inserted
Memory card inserted
Mic is ON
Mic is OFF
Loop recording OFF
Loop recording ON
Parking Mode
Recording Time
(Current Session)
Current Date and
Time (12/24H)
Icons for indicating
buttons

Vantrue E1 Lite Specifications

General

Field of View	170°
Wi-Fi	Yes
G-Sensor	Yes
Loop Recording	Yes
Parking Mode	Yes
Frame Rate	30fps
Video Format	MP4
Night Vision	Yes
Screen Size	2 inch
Operating Temperature	-4°F to 158°F (-20°C to 70°C)
GPS	Optional (requires additional GPS mount, sold separately)
Storage	MicroSD card up to 512GB (not included)