Vantrue E1 Lite User Manual

9
Note: This sticker has two protective layers – first, peel off the top layer, stick it onto the
windshield, and then remove the second layer to expose the adhesive side.
3. Peel the 3M tape from the mount to reveal the adhesive side. Position the mount
on the windshield over the electrostatic sticker and press firmly to ensure it is
affixed properly.

Vantrue E1 Lite Specifications

General

Field of View	170°
Wi-Fi	Yes
G-Sensor	Yes
Loop Recording	Yes
Parking Mode	Yes
Frame Rate	30fps
Video Format	MP4
Night Vision	Yes
Screen Size	2 inch
Operating Temperature	-4°F to 158°F (-20°C to 70°C)
GPS	Optional (requires additional GPS mount, sold separately)
Storage	MicroSD card up to 512GB (not included)