Vantrue Mirror 3 - Menu Settings; General, Recording, and Display Settings

- 10 -
After power ON the camera, press the button to enter the
setup process.
(If the camera is recording video, press the button to stop
recording before pressing the button.)
Language: Available languages are English/Français/
Español/Deutsch/Italiano/简体中文/русский/日本語/Polski.
Date & Time: Automatically sets the time by GPS, Set the
date and time, the time system (24-hour Format by Default),
and the time zone.
Storage: Display Total Memory/Available Memory/Format SD
Card.
Format Reminder Setup: Select the reminder options: 15
Days, 1 Month, and Off. The default is off.
Resolution: The M3 camera has 2 resolution modes: Front
+Cabin+ Rear recording mode, or Front+Rear recording
mode.
Front +Cabin+ Rear Recording: 1440P+1080P+1080P;
1080P+1080P+1080P;
Front+Rear Recording: 1944P+1080P; 1440P+1080P;
1080P+1080P.
Video frame rate of the front camera: Select the video
frames. 30FPS/28FPS optional.
Loop Recording: The default setting is 3 min. You can choose
the options among 1/3/5 min and OFF. If you select “off”, the
looping recording is 20 minutes per clip.
Cabin Mirror: The default is ON. If you turn it on, the internal
recording screen is displayed in mirror mode.
Internal Rotate Display(180°): The default is Off. If you turn it
on, the Internal recording screen will be flipped 180°.
Rear Mirror: The default is ON. If you turn it on, the rear
recording screen is displayed in mirror mode.
Rear Rotate Display(180°): The default is Off. If you turn it on,
the rear recording screen will be flipped 180°.
Audio Recording: The default is ON. Set recording to on or
off.
3.8 Menu Settings
ENEN