toggle it OFF/ON.
-Parking Monitor: Default is OFF. Press DOWN followed by OK to
toggle it OFF/ON.
-Exposure: Default is 0. Pressing OK gives the following options: 0,
-1.0, -2.0, +2.0, +1.0
-Car Number Plate: Press UP/DOWN and OK to set your car license
number.
-HDR: Default is ON.
-Stamp: Default is ON. Press OK to toggle it OFF/ON. Stamp shows
the date/time, logo, car number, Speed and GPS Location
information.
-Rotate Display: Default is OFF. Press OK and DOWN button to
toggle it OFF/ON.
-Time Lapse: Default is OFF. Press DOWN followed by OK to set
time interval: 1 Sec, 5 Sec, 10 Sec, 30Sec, 1Min, Off.
-Power Off Delay: Default setting is ON, forcing the camera to
automatically end recording and turn off after you power down
the car. Press OK and DOWN button to toggle it OFF/ON.
To finish setup, press the MENU button to exit.
-Language: Default is English. Press OK to select between English,
Simplified Chinese, German, Japanese, Spanish, French, and Italian.
-Format memory Card: Press OK, navigate DOWN and select OK
to format the microSD card.
-Time & Date: Press UP/DOWN and OK button to set the current
date and time. Press the MENU button to exit.
-Auto LCD Off: Default is 3 MIN to turn OFF the camera 3 minutes
after recording commences. Press the OK button to select the
duration in minutes: 1, 3, 5, or OFF to disable it.
-Device Sound: Default is ON. Press the OK button to toggle it ON/OFF.
-Non-use Auto Power OFF: A default setting of 3 MIN means the
camera is ON but not in use, it will auto turn OFF after 3 minutes
of inactivity. Press OK to choose between 1, 2 minutes or 3 minutes,
or OFF to disable this feature.
-Flicker Frequency: Default is 50Hz. Press OK to toggle between
50Hz/60Hz.
-System Info: Press OK to check the current firmware version.
(System Info)
B. System Setup
- 9 -
To Next Page
Loading...
Need help?
General
