Vespera Instruction Manual v1.2 EN 2022-06 9
Stopping the observation
1. Remove the AC021 solar filter by pressing the button provided for that purpose.
2. Put the cover back on and press the "close arm" button.
Note:
• There is a visual marker with the letter S located on the inside of the filter for easy
identification when the filter is not mounted on the product.
• For optimal storage, we recommend storing the filter in its original plastic box.
• Cleaning and maintenance must be performed with caution. Only use wipes specifically
intended for optical lenses.
VII. Care and maintenance
Vespera is an optical instrument, it is therefore fragile and requires a lot of precaution during its use.
The front lens must not come into contact with fingers, cloths, eyeglass cloths, liquids etc.. Only specific
wipes for optical lenses can be used.
The plastic shell can be cleaned with a soft cloth and soapy water.
Do not open the device under any circumstances. Do not attempt to disassemble, modify or repair the
device, as this will void the warranty and may cause the instrument to malfunction. otherwise the warranty
may be void and the instrument may malfunction.
If any issue arises, please contact the assistance on +33 5 32 18 35 43 or +1 (855)-399-0947 or by email
at support@vaonis.com.
VIII. Transport and storage
Vespera should be transported with care, keeping shocks and vibrations to a minimum.
Do not transport Vespera outside a dedicated bag or carrying case.
The telescope should be stored in a clean and dry place. If moisture is present on the instrument, it is
recommended to let it dry before storing it in the box to prevent the formation of mold.