Vespera Instruction Manual v1.2 EN 2022-06 7
Note:
• There is a visual marker with the letter C located on the inside of the filter for easy
identification when the filter is not mounted on the product.
• For optimal storage, we recommend storing the filter in its original plastic box.
• Cleaning and maintenance must be performed with caution. Only use wipes specifically
intended for optical lenses.
Vespera AC022 Dual-Band Filter
Only handle the filter by its edge to avoid dirtying or damaging it
1. Turn the product on.
2. Connect to Vespera via the Singularity application.
3. In the application, go to the "space center" page.
4. Go to "Instrument".
5. Press "open arm". The arm will open 180°.
6. Remove the cover on the front end of the optical arm by pressing the button provided for that
purpose.
7. Position the AC022 dual-band filter.
8. If properly assembled
a filter icon and the name of the filter, "DUAL", will appear under the product image
initialize the product and launch an observation
9. If improperly assembled or defective
the filter icon will not appear under the product image, "no filter detected" will appear instead
remove the filter and reassemble. If the problem persists, contact support
Note:
• There is a visual marker with the letter D located on the inside of the filter for easy
identification when the filter is not mounted on the product.
• For optimal storage, we recommend storing the filter in its original plastic box.
• Cleaning and maintenance must be performed with caution. Only use wipes specifically
intended for optical lenses.
To Next Page
Loading...
