EasyManua.ls Logo

Vaporesso Target MINI II Kit - User Instructions and Operation; Filling E-juice and Installing Tank; Main Screen Interface; Lock and Unlock Button Functions

Vaporesso Target MINI II Kit
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 3English English
USE INSTRUCTION:
2) Main screen

Continually 5 press of re to turn on and off
Continually 3 press of re to unlock/lock.
Continually 3 press of mode to lock/unlock mode
button.
4) Choose your mode
VW-H /VW-N /VW-S (Variable Wattage mode - high/normal/soft): it will automatically select the adequate
average wattage for your atomizer If you switch between different ohms resistance.
CCW (Custom Curve of Wattage mode): To use the up and down buttons to customize you own curve of wattage
output line ,move to the next bar with a quick press of the re button,press the mode button to save and exit
when setting is done.
SP (Super Player mode): In this mode, it will support broader resistance range from 0.0 to 5Ω, which is
adaptive to mainstream RDA tanks.
VV(Variable Voltage mode): You can manualy adjust the voltage to match the resistances of the coil you use, the
higher resistance of the coil you use, the higher voltage it require correspondingly.
CCV (Custom Curve of Voltage mode): In this mode, you can use the up and down buttons to customize you own
curve of voltage line ,move on to the next bar with a quick press of the re button , press the mode button to save
and exit when all modications are done.
SS/NI/TI : Variable temperature control mode for Stainless Steel/Nickel/Titanium material (Auto Function
enabled). the device can separately support Nickel 200, Titanium, and Stainless Steel coils smartly , it will
intelligently adjust temperature control parameters based on the heating wire material's resistance value you use,
also it allows you to change the startup wattage.
M1/M2 (Temperature Coefcient of Resistance) You can choose your own manual setting and set the TCR at
1) Filling the E-juice and install tank.
Uncrew the drip tip directly, then you can ll your favorite
E-juice through the opening.and following below to replace
coil or galss.
Filling E-Juice Replace coil Replace glass
321
battery level
Mode
Setting value
Instant Voltage/
wattage
coil
resistance
value
puff counter
Last vaping duration

Related product manuals