17
05 Output Delay 00-15 Minutes
(00 Default)
06 - -
07 Up/Down Temp Limit 00-10°C (00°C Default)
08 Sensor Selection 00 = Built In Air Sensor
Mode 00 MUST not 01 = Remote Air Sensor
be used for 02 = Floor Sensor Only
Underfloor heating 03 = Floor Sensor and
Built in Air Sensor
04 = Floor Sensor and
Remote Air Sensor
09 Floor Temp Limit 20-45°C 28°C Default
10 Optimum Start 00-03 (00 hours default)
11 Rate of change Information only
12 Weekday/Weekend 00 = Weekday/Weekend
01 = 7 day programming
To Next Page
Loading...