VARRAM APPBOT RILEY - Product Registration

CHAPTER 02 Installation and execution
Execution > Product registration
10
AppBot
Installation
Caution
Installationofsmartphone
application
Execution
Caution
Productregistration
Connecting
Reconnect
01 After pressing power button for 1 second, green LED will be show, means it is ON. Turning OFF method is also same.
(When you start Riley for the first time, make sure press and hold "Power + Reset" Buttons at the bottom of RILEY for second.
02 LED (see arrow) turn from blue-purple-off-green (the whole process complete in 20 second when you hear ' I'm ready ' )
1
1
I'm ready!
NormalActivateStatusLED
PowerON PowerOFF
LowbatteryStatusLED