Varytec Colors SonicStrobe - Page 32

This function switches the display o after 30 s.
Press [MENU] repeatedly until the display shows ‘LED’ . Conrm with [ENTER].
Use and select between the options ‘ON’ (display stays on) and ‘OFF’ (display turns o
after 30 s) and conrm with [ENTER].
This function rotates the display by 180 °.
Press [MENU] repeatedly until the display shows ‘DISP’ . Conrm with [ENTER]. The display is
now inverted.
This setting is only relevant when the device is controlled via DMX.
n Briey press [MENU] repeatedly until the display shows ‘Addr’ . Conrm with [ENTER].
Use and to select a DMX address in the range from ‘A001’ … ‘A512’ and conrm with
[ENTER].
n Briey press [MENU] repeatedly until the display shows ‘XXCH’ . Conrm with [ENTER].
Use
and to select DMX mode ( ‘7CH’ , ‘13CH’ , ‘22CH’ or ‘148C’ ) and conrm with
[ENTER].
Display shutdown
Display setting
Operating mode ‘DMX’
Operating
32
Colors SonicStrobe
stroboscope