CAUTION!
Risk of injury due to stray laser radiation!
Additional components inadequately secured to the device as well as reective
objects and surfaces at the operating location can cause stray laser radiation,
which can cause injuries.
Make sure that additional components are always secured adequately.
Make sure there are no reective objects or surfaces in the range of the laser
beams.
CAUTION!
Risk of injury due to improper installation!
There is a risk of injury if a laser is set up incorrectly and the installation point is
too low or too close to persons.
In order to comply with the maximum legal exposure limits, determine the actual
radiation intensities at the operating location as well as the distances for laser
attachment, and install the laser in line with the ambient conditions.
Make sure the laser is rmly attached, and prevent the laser beam from leaving
the planned laser beam area (e.g. through screens, housings or software-specic
direction restrictions).
Shield laser beams from each other if multiple lasers are operated simultaneously.
Install the laser in such a way that the laser beam does not enter any trac zones.
Installation
14
Razor Derby
LED Eect