WiFi configuration
Manage your WiFi networks here.
If you see “WiFi is disabled”, tap the button. You will see the list of available networks.
Tap the name of the network to connect to it.
Padlock – this icon means that the network is secured with a password.
If you have the password, tap the name of the network and enter the password. Then, tap “OK” and use the device. If you donʼt know the password, contact
the network provider.
Signal – the green bars show the signal strength.
Name – tap the name of the network to connect to it.
WARNING: A network without a padlock means that this network is open. You donʼt need any password to connect to it. Please note, that some open
networks require additional actions to be taken such as logging in or accepting terms and conditions. Itʼs not possible to use this type of network with Vasco
Translator M3.
SIM configuration (only for advanced users)
This menu is visible only for devices with a non-factory SIM card.
Mobile data - You can configure data roaming, preferred networks etc.
Data roaming - allows you to connect to data services (It is strongly recommended to leave this option ON while using GSM).
Preferred networks - This option allows you to select an operator manually.
Preferred network type - This option allows you to set preferred network type.
Enhanced 4G LTE Mode - Tap to toggle this setting on or o
Access Point Names - This option allows you to change APN Names.
Network operators - This option allows you to choose network operators manually.
APN Settings - allows you to change APN settings.
Application language
Change the language for device menus.
To Next Page
Loading...
