Introduction 13
Note
In subsequent chapters the
operating steps for adjusting a
setting via the touch screen will be
described as "...adjust
the...setting...".
Example: Radio settings
Tap on the < or > screen buttons
beside a setting to choose one of the
available options or to set a specific
value.
Note
In subsequent chapters the
operating steps for switching to
another option via the touch screen
will be described as
"...set...to...'option name'/'value'...".
Example: RDS option
Tap on the On screen button or the
Off screen button beside a setting to
activate or deactivate this option.
Note
In subsequent chapters the
operating steps for switching a
setting to On or Off via the touch
screen will be described as
"...set...to...On..." or
"...set...to...Off...".
Example: DAB category list
Tap on a list item to select or unselect
the option. If a list item is selected, a
checkmark appears within the box
beside the item.
Note
In subsequent chapters the
operating steps for choosing an
option via the touch screen will be
described as "...choose...'option
name'...".
To Next Page
Loading...
Need help?
General
