Vauxhall 2013 Adam Infotainment Manual

42 Phone
Pairing a device
Important information
■ Up to five devices can be paired to
the system.
■ Only one paired device can be
connected to the Infotainment
system at a time.
■ Pairing normally only needs to be
carried out once, unless the device
is deleted from the list of paired
devices. If the device has been
connected previously, the
Infotainment system establishes
the connection automatically.
Pairing a new device via the
Bluetooth settings menu
1. Press the ; button and then
select the Settings screen button.
Select Connection settings and
then Bluetooth settings to display
the respective menu.
2. On the Infotainment system: set
the Discoverable function to On to
make the Infotainment system
visible to the Bluetooth device.
On the Bluetooth device: activate
the Bluetooth function and the
discoverability mode.
3. On the Infotainment system:
select Bluetooth device list to
display the respective submenu.
4. On the Infotainment system: tap
on the Search Bluetooth Device
screen button. All discoverable
Bluetooth devices in the
environment are displayed in a
list.
5. Tap on the Bluetooth device you
wish to pair.
6. If SSP (secure simple pairing) is
supported:
Confirm the messages on the
Infotainment system and the
Bluetooth device.
If SSP (secure simple pairing) is
not supported:
On the Infotainment system: an
Info message is displayed asking
you to enter a PIN code on your
Bluetooth device.
On the Bluetooth device: enter the
PIN code and confirm your input.
7. The Infotainment system and the
device are paired.

Vauxhall 2013 Adam Specifications

General

Brand	Vauxhall
Model	2013 Adam
Category	Automobile
Language	English