182 Vehicle care
2. Untwist wing nut and remove tool
box.
3. Position the damaged wheel to
stand upright into the tool box
spare, facing to the front.
4. Remove strap 1 from the tool box
and place the loop end of the strap
through the right side lashing eye.
5. Place the hook end of the strap
through the loop and pull it until
the strap is fastened securely to
the lashing eye.
6. Insert the strap through the
spokes of the wheel as shown in
the illustration.
7. Mount the hook to the left side
lashing eye.
8. Tighten the strap and secure it
using the buckle.
To Next Page
Loading...
