82 Instruments and controls
Flashes when the engine is
running
Fault that could lead to catalytic
converter damage. Ease up on the
accelerator until the flashing stops.
Seek the assistance of a workshop
immediately.
Service vehicle soon
g illuminates yellow.
Additionally a warning message or a
warning code is displayed.
The vehicle needs a service.
Seek the assistance of a workshop.
Vehicle messages 3 91.
Brake and clutch system
Brake and clutch fluid level
R illuminates red.
The brake and clutch fluid level is too
low 3 152.
9 Warning
Stop. Do not continue your
journey. Consult a workshop.
Illuminates after the ignition is
switched on if the manual parking
brake is applied 3 124.
Operate pedal
- illuminates or flashes yellow.
Clutch pedal needs to be operated to
start the engine. Stop-start system
3 119.
Illuminates
Brake pedal needs to be operated to
release the electrical parking brake
3 124.
Flashes
Clutch pedal needs to be operated to
start the engine 3 118.
Antilock brake system
(ABS)
u illuminates yellow.
Illuminates for a few seconds after the
ignition is switched on. The system is
ready for operation when the control
indicator extinguishes.
If the control indicator does not go out
after a few seconds, or if it illuminates
while driving, there is a fault in the
ABS. The brake system remains
operational but without ABS
regulation.
Antilock brake system 3 123.
Upshift
[ illuminates green as control
indicator, or is shown as a symbol in
the Driver Information Centre with
Uplevel-Display, when upshifting is
recommended for fuel saving
reasons.
On some versions gear shift
indication is popped up as full page in
the Driver Information Centre.
EcoFlex drive assistant 3 94.
Power steering
c illuminates yellow.
To Next Page
Loading...
Need help?
General
