76 Instruments and controls
Fuel gauge
Displays the fuel level or gas level in
the tank depending on the operation
mode.
Control indicator Y illuminates if the
level in the tank is low. Refuel
immediately if it flashes.
During liquid gas operation, the
system automatically switches over to
petrol operation when gas tanks are
empty 3 76.
Never run the tank dry.
Because of the fuel remaining in the
tank, the top-up quantity may be less
than the specified tank capacity.
Fuel selector
Press button LPG to switch between
petrol and liquid gas operation. The
LED in the button shows the current
operating mode.
LED off = petrol operation
LED
illuminates
= liquid gas operation
LED flashes = no switching is
possible, one type
of fuel is empty
As soon as the liquid gas tank is
empty, petrol operation is
automatically engaged until the
ignition is switched off.
Fuel for liquid gas operation 3 142.
Engine coolant
temperature gauge
Displays the coolant temperature.
left area = engine operating
temperature not yet
reached
central
area
= normal operating
temperature
right area = temperature too high
To Next Page
Loading...
Need help?
General
