262 Service, maintenance
To ensure proper operation of the rain
sensor 3, the sensor area must be free
from dust, dirt and ice, which is why the
windscreen wash system must be operated
at regular intervals and the sensor area
de-iced. Vehicles with a rain sensor 3 can
be identified by the sensor area near the
top of the windscreen.
Service setting for front windscreen wiper
(e.g. for changing or cleaning the front
wiper blades).
Within 4 seconds of switching off the
engine but with the key in the starter
switch, press the windscreen wiper stalk
downwards. Release the stalk as soon as
the wiper blades are vertical.
Wiper blades on the windscreen
Activate service setting – see previous
column. Raise wiper arm, tilt wiper blade at
a 90° angle to the wiper arm and remove to
the side.
Ofrecido por www.electromanuales.com
To Next Page
Loading...
