Driving and operating 199
Additionally, at least the third gear
must be engaged on some manual
transmissions.
On automatic transmission, position
D or the second or a higher gear in
position M must be selected.
Deviations from the stored speeds
may occur when driving uphill or
downhill.
The system maintains the vehicle
speed at the preset speed by the
driver, without any action on the
accelerator pedal.
The preset speed can be exceeded
temporarily by pressing the
accelerator pedal firmly.
The status and preset speed is
displayed in the Driver Information
Centre.
Do not use the cruise control if it is not
advisable to maintain a constant
speed.
Switching on the system
Press v.
Symbol v and a message are
displayed in the Driver Information
Centre. The system is still not active.
Activation of the functionality
Setting speed by the driver
To Next Page
Loading...
