Package Diagram
USB Charging Port
LED Indicator / Multifunction Button
Microphone (Right Earbud only)
Quick Start
Please note that the Right Earphone is the “master device” and the
Left Earphone is the “slave device”. Bluetooth pairing is controlled from
the master device.
1. When the master device is off, press and hold its Multifunction
Button for more than 5 seconds to power on and enter pairing
mode.
2. When in pairing mode, the LED Indicator flashes blue and red.
3. When paired and connected to your phone, the LED Indicator
flashes blue.
4. Power on the slave device, it will sync with the master device
automatically.
5. The LED Indicator on the slave device flashes blue when
connected to the master device and paring is completed.
①
②
③
03/04
To Next Page
Loading...