Vax ACTION 602 U86-AN-BE User Manual

Cleaning the post motor lter
Cleaning the separator
Press post motor
lter cover clip, pull
to remove.
Turn separator
anti-clockwise
to ‘unlock’, pull
to remove.
Remove any dirt/
debris. Rinse under
water (max 40°C).
Using a soft brush
clean any dirt/debris
out of the separator.
Remove post
motor lter.
Tap separator over
a bin to remove any
dirt/debris.
Leave to dry for 24
hours or until fully dry
before placing back in
the vacuum cleaner.
24hr
Line up tabs on
separator with dirt
container, turn
separator clockwise
to ‘lock’ and click
into place.
The separator
should sit on seal
in bottom of dirt
container when
correctly tted.
Taking care of your machine

Vax ACTION 602 U86-AN-BE Specifications

General

Brand	Vax
Model	ACTION 602 U86-AN-BE
Category	Vacuum Cleaner
Language	English