Looking after your machineGetting started How to use
1. Insert the handle.
2. Pull handle up/down to adjust to the
desired height.
Attach the hose end to the oorhead
ensuring it clicks into place.
(All accessories can be used by either
attaching them to the handle or the hose.)
For brushbar position, press the brushbar
on/o button at the top of the unit.
Brushbar on — carpets.
Brushbar o — hard oors.
Twist the handle to manoeuvre under
and around furniture.
For full instructions, please refer to the online
user guide at vax.co.uk/support
For above the oor cleaning, turn brushbar o, remove handle from the unit and attach
to hose. Always hold the unit during above the oor cleaning.
For brushbar blockages, refer to the online user guide at vax.co.uk/support on how to unblock.
IMPORTANT: Do not use your vacuum cleaner without all of the lters in place.
Performance is everything.
Performance is everything.
vax.co.uk
vax.co.uk
Twist the cord holder to release the cord. Plug in your machine and turn it on.
Pre-motor lter
Lifetime
Post-motor lter
Parts and accessories
Filter kit (Type 60): 1-1-132030-00
Turbo tool (Type 1): 1-1-126261-00
Flat upholstery tool: 1-1-131394-00
Flexi crevice tool (Type 1): 1-1-131393-00
Fur and Flu tool: 1-1-131392-00
The use of genuine vax spare parts helps to
maintain optimised performance and validates
your guarantee
If you require spare parts or would like some
more accessories, please visit vax.co.uk/support
or call our customer care centre:
(UK) 0844 412 8455 (ROI) 1-800 928 308
Wash lters with warm water (40
o
C max) at least
every 3 months for best cleaning results. For
detailed information on maintaining your vacuum
cleaner and its lters, please refer to the full user
guide at vax.co.uk/support
1
2
To Previous Page
Loading...
