Using your machine
Emptying and cleaning the dirt container
Press the dirt container release button and pull
to remove the dirt container.
Hold dirt container over a bin and press the dirt
container release button to open allowing dirt to fall out.
Cleaning the HEPA pre-motor lter
Turn the dirt container lid
anti-clockwise…
Tap the lter over a bin
to release any dirt.
…and lift to remove.
Wash the lter under
running water (40°C max).
Grasp tab on lter and pull to remove.
Leave to fully dry for at least 24 hours
before putting back into the vacuum cleaner.
40°C max
tap
24hr
How to use the air vent
Slide vent cover open to decrease suction,
if required on high piled carpets.
Close the vent cover to increase suction,
for maximum cleaning on hard oors.
NOTE: For most ecient results the air vent should be closed.
To Next Page
Loading...
Need help?
General
