Taking care of your machine
Emptying and cleaning the dirt container
How to use the air vent
Cleaning the HEPA pre-motor fi lter
Press the dirt container release button and pull
to remove the dirt container.
Slide vent cover open to decrease suction,
if required on high piled carpets.
Turn the dirt container lid
anti-clockwise…
Tap the lter over a bin
to release any dirt.
Hold dirt container over a bin and press the dirt
container release button to open allowing dirt to fall out.
Close the vent cover to increase suction,
for maximum cleaning on hard oors.
…and lift to remove.
Wash the lter under
running water (40°C max).
Grasp tab on lter and pull to remove.
Leave to fully dry for at least 24
hours before putting back into the
vacuum cleaner.
40°C max
tap
To Next Page
Loading...
