Unwrap power cord and
plug unit in.Then, click the back section into place. Fill the clean water and solution tank with hard
Press trigger to
release solution.
Turn the machine on.
For best results apply
solution on the forward
stroke and release the
trigger to recover solution
on the backward stroke.
To avoid saturating your
than 4 wet strokes over
one area. Always end with
dry strokes.
Recline the machine. When
the machine is reclined,
the brushes will rotate.
In an upright position, the
brushes will not rotate.
Set the wash/rinse/max
extract switch to WASH.
Spinscrub brushes deep
with water and solution
to remove dirt and stains.
Click
CAUTION:
cleaning recommendations.
NOTE:
:TNATROPMI
9
How To Use
To Next Page
Loading...
Need help?
General
