Picking up spills
For small spills, use the upholstery wash tool provided.
Remove hose. Place hose into hose connection port and turn clockwise to secure.
Turn the machine on. Pull wash tool back over
spill to pick up liquid.
Turn the machine on. Recline the machine. Set the wash/rinse/max
extract switch to
MAX EXTRACT.
For large spills use the carpet washer on MAX EXTRACT mode
Align solution tube with
connector port. Push in and
turn clockwise to secure.
For superior drying
performance use in
combination with the max
extract pedal. The brushes
will not rotate when the max
extract pedal is pressed.
For best results use straight
parallel strokes.
Attach the upholstery wash
tool onto the end of the hose.
12
How To Use
vax.com.au
To Next Page
Loading...
Need help?
General
