Getting started Using your machine
Twist the tank cap into
place to secure
Place the bottom of the Clean
water tank onto the machine
rst and click the top into place.
Pour cleaning detergent
into tank. Top up tank to
ll line with warm water
(Max 40°C)
Emptying the recovery tank
To remove recovery tank,
press down on release
button and pull
Unclip latches on recovery
tank lid, remove lid to empty
Note: The recovery tank has an automatic shut o to prevent the tank from
overowing. If this is activated, the machine will not pick up and the sound of the
motor will change. The recovery tank will need to be emptied.
Pour dirty water into sink
Place the bottom of the
recovery tank onto the
machine rst and click
the top into place
To Next Page
Loading...
