10
support.vax.co.uk
CLEANING THE FILTER AND SEPARATOR
Push the tab on the lid of the dirt container and lift the cover to access the lter.
Lift the lter and separator from the
dirt container.
Tap the separator over a bin to remove
dirt and debris and wipe over the metal
shroud with a dry cloth.
Pull the tab on the lter to remove from
the separator.
Tap the lter against the bin to remove
any dirt and debris.
Wash the lter under running water
(40°C max). Leave for at least 24hrs or
until fully dry before replacing.
24hr
40°C
MAX
CLEANING & MAINTENANCE
CAUTION: Ensure both
the lter and separator are
retted before use.
To Next Page
Loading...
