Vax ONE PWR CORDLESS BLADE 4 Series - Brushbar Maintenance; Cleaning and Replacing Brushbar

11
support.vax.co.uk
CLEANING AND REPLACING THE POWERED HEAD BRUSHBAR
Pull the brushbar out from the brushbar
housing.
To remove any threads or hair, slide
the blade of a pair of scissors into the
groove on the brushbar and cut along
the groove.
Clear any dirt/debris from the end caps
and inside the housing of the powered
head.
CLEANING & MAINTENANCE
Ret the brushbar into the oorhead. Align the arrow on the brushbar cover so it
points north, rmly push and twist clockwise to lock.
Using a coin, push and turn the brushbar lock anticlockwise to release the brushbar.Press the oorhead release button to
remove the oorhead from the machine.