12
support.vax.co.uk
CLEANING & MAINTENANCE
To test for a blockage in the reach wand,
drop a small ball of paper into the wand.
The paper will drop through if the wand
is clear. Use a broom handle or similar
blunt object to remove any blockage.
CHECKING FOR BLOCKAGES
Press the handheld release button and
remove the reach wand. Check and clear
any dirt and debris from the handheld
connection point.
Press the dirt container release button
and remove the dirt container. Check
and clear any dirt and debris from
behind the dirt container ap.
Check the powered head for any
blockages and use a blunt object to
remove the blockage.
To Next Page
Loading...
