11
Cleaning and maintenance
Cleaning the filter and separator
Push the tab on the lid of the dirt container and lift the cover to access the filter.
Refit the separator making sure that the
tab on the separator fits into the groove
on the dirt container.
Lift the filter and separator from the
dirt container.
Tap the separator over a bin to remove
dirt and debris and wipe over the metal
shroud with a dry cloth.
Pull the tab on the filter to remove from
the separator.
Tap the filter against the bin to remove
any dirt and debris.
Wash the filter under running water
(40°C max). Leave for at least 24hrs or
until fully dry before replacing.
24hr
40°C
MAX
IMPORTANT: Filters should be tapped over a bin every 4-6 uses to remove dirt and debris and
washed every 3 months. Filters should be replaced every 6-9 months depending on the level of use.
To Next Page
Loading...
Need help?
General
