Taking care of your machine
Line up spindle and tabs on
side of spin scrub cover into
carpet washer, push rmly
until it clicks into place.
Using a pair of scissors,
remove any threads or
hair caught around the
brushes. Rinse under
water to remove debris.
Removing and cleaning the SpinScrub brushes
Firmly pull the sides
of the SpinScrub
cover and remove the
SpinScrub brushes.
Lie the carpet washer on its
back exposing the SpinScrub
brushes and brushbar.
TIP
Carpets and hard oors should be dry
vacuumed thoroughly before washing.
This will help prevent excessive build
up of dirt/debris in the nozzle.
To Next Page
Loading...
