6
Filling the solution tank
IMPORTANT: It is recommended that the solution tank is filled when fitted on the machine.
Unused solution can be left in the tank after use or poured back into the solution bottle.
Twist the clean water
tank cap anticlockwise and
remove.
Slide up and lift to remove
the clean water tank.
Filling the clean water tank
Fill the clean water tank
with warm water
(max 40�C).
To replace the clean water
tank align the clean water
tank with the body of the
machine. Slide it down and
press firmly into place.
Twist the solution tank cap
anticlockwise and remove.
Twist the solution tank cap
clockwise until tight.
Fill the solution tank with
the Vax carpet cleaning
solution.
Using your machine
Twist the solution tank
cap clockwise until tight.
To Next Page
Loading...
