Vax POWERMAX VRS18W User Manual

vax.co.uk
8
troubleshooting / uk service and help
7. Troubleshooting
WARNING: To reduce risk of personal injury, unplug
carpet washer before servicing.
Problem: The carpet washer won't run
Cause: Not properly plugged into electrical outlet.
Solution: Plug in firmly.
Cause: No electricity in electrical outlet.
Solution: Check fuse or breaker.
Cause: On/off switch not turned on.
Solution: Push on/off switch to ‘on’.
Cause: Blown fuse/tripped breaker.
Solution: Reset circuit breaker or replace fuse.
9. Consumables
To purchase spares and accessories, please visit
vax.co.uk
Filter kit (Type 51) 1-1-130680-00
8. UK Service & Help
Vax Careline
(UK) 0844 412 8455
(ROI) 1-800 928 308
Monday-Friday 8.30am to 6.30pm
Saturday and Sunday 9.00am to 5.00pm
Any queries or concerns about using the Vax, call the
Vax Careline.
Please make a note of the serial number and model
number of the carpet cleaner before calling. For the
nearest Service Agent, please call the Vax Careline.
vax.co.uk
10. Technical Specification
Voltage: 220 ~ 240V 50Hz
Motor Power: 500W
Clean water tank volume: 2.1 litres
Dirty water tank volume: 1.7 litres
Cord length: 5.5m
Weight: 5.6kg
Subject to technical change without notice
VRS18W Updated UG 06.07.14_V1.0 04/07/2014 15:30 Page 8

Vax POWERMAX VRS18W Specifications

General

AC input voltage	220 - 240 V
AC input frequency	50 Hz
Maximum input power	500 W
Annual energy consumption	- kWh
Cord length	5.9 m
Dust capacity	- L
Product color	Black, Red
Tube material	Metal
Dust container type	Bagless
Noise level	- dB
Machine type	Step-on
Cleaning type	Wet
Cleaning surfaces	Carpet, Hard floor
Maximum area covered	- m²
Vacuum air filtering	-
Maximum area performance	- m²/h
Dirty water tank capacity	1.7 L
Fresh water tank capacity	2.1 L
On/off switch	Yes

Weight and Dimensions

Weight	5600 g