WARNING: Never use the squeegee on cold glass/windows as it may cause damage.
Stretch utility pad over
utility head.
Push utility head and pad into steamer until
secure. It will not lock into place. Pull test
to check it is secure.
Small tools can be attached via the
concentration nozzle. Push together to
click into position and secure. Push hard
and ensure click is heard. Add pull test on
brushes to check tools are secure.
Push utility head and squeegee
into steamer until secure. It will
not lock into place but should sit
rmly against steamer.
Attaching accessories
Attaching brushes Attaching utility head
Attaching squeegee
Align the tab on the squeegee with the
utility head and utility pad, push together
to lock into position. Please note that the
utility pad must be attached to the utility
head before the squeegee can be tted
on. Squeegee will not connect without
the pad on rst.
To remove, pull squeegee down
on tab.
Using your machine
TIP
After attaching your
chosen accessory
gently pull to make
sure it’s locked into
place or feels secure.
To Next Page
Loading...
Need help?
General
