Getting started
Subject to technical change without notice.
*To purchase consumables and accessories, please visit vax.co.uk
Handle
Handle height adjuster
Post-motor lter cover
Rotating brushbar
Brushbar blockage indicator
Upper handle release button
Separator
Dirt container
Dirt container
release button
Hose to extension tube connector
Power on/o button
Power cord
Quick release
cord hook
Carry handle
Post-motor lter release button
Brushbar on/o button
Wheels
Hose to
machine connector
Hose
Accessories & Consumables
Technical Specication
Filter Kit (Type 90)*
1-1-134227
TurboTool (Type 6)*
1-1-134419
Belt (Type 26)*
1-1-134530
3-in-1 tool
1-1-129167
Fur ‘n’ Flu tool
1-1-131392
Flexi Crevice tool
1-1-131393
Flat Upholstery tool
1-1-131394
Name Air™
Voltage See rating label on machine for details
Wattage See rating label on machine for details
Capacity 1.5L
Cord length 6-12m
Weight 4.9kg
Telescopic extension tube
Getting to know your machine
Assembling your upright
Insert the handle.
Twist the quick release cord
hook to release the power cord.
Place the 3-in-1 tool onto
the on board storage area.
Adjust handle up
or down to select
the desired height.
Plug in your machine and push
ON/OFF button to switch on.
Brushbar on — carpets
Brushbar o — hard oors
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
How to use
Recline the unit.
IMPORTANT: Switching the brushbar on whilst cleaning hard oors may damage ooring.
NOTE: The brushbar will not spin until the machine is reclined.
To Next Page
Loading...
Need help?
General
